VACUUM

WORM

CHAINS

Vacuum designed to remove large quantities of dust and of the waste granular material produced by the chain saw cutting.
The waste material is removed from the accumulation zone adjacent to the cut by means of a fl exible hose and of a suction cup.
The vacuum can be installed on a trailer moving on the rails along with the chain saw.
The waste material is deposited on the ground, in the opposite side of the cut.

Dust unit with motor of 15kW
Electric control board and valves for automatic cleaning of the filters
Compressor 4kW
Total installed power 19kW
Air capacity 2300 m3/h

Worm designed to carry and to remove automatically large quantities of dust and of the waste granular material produced by the chain saw cutting.
The cut waste material is carried in the feed-box of the worm, and then deposited on the ground, at 2 meters distance from the cut.

1 – CHAIN PITCH 121MM
Larghezza di taglio 38 mm
Sono disponibili portainserti per utensili tipo:
– WIDIA 8 Taglienti
– PCD Ø 13 mm
– PCD 8 mm

2 – CHAIN PITCH 110MM
Cutting width 42
Available toolholders for tools type:
– WIDIA 4 Cutting edges
– PCD Ø 13 mm
– PCD 9.4 mm

3 – MONO-LINK CHAIN 74 MM PITCH
Cutting width 42
Available toolholders for tools type:
– WIDIA 4 Cutting edges
– PCD Ø 13 mm
– PCD 9.4 mm